210 Electric nail drill

Multipurpose micromotor for laboratory, jewelry, industry, beauty, hobby, Manicure. It contains a SDE-H20N Handpiece. The handle sizes are 2.35mm, 3.0mm and 3.175mm. We ship 2.35mm to you by default. If you want other sizes, please contact us.
Good work for polishing, cutting, milling, trimming, grinding, casting moulds or materials and finishing surface.
Precise Ball Bearing: Excellent durability, excellent operation, long life. Nail-Optimized Balance of Spindle: lesser noise, lesser vibration.
It supports 110v/220v voltage switch. We ship US plug by default. If you want Euro plug 220V, please contact us in time after purchase.
We offer a variety of Electric Nail Drill products. If you need to purchase them in batches, please contact us and we will offer you a better price.

Electric Manicure

Precautions when using the Hand-piece

1. Install the Control Unit in the room of suitable temperature(0-40 C). Using it in an excessively dusty, warm or humid location damages to the Control Unit. 2. The Control Unit should rest on a flat steady place which is not disturbed by other things.

3. Never plug or unplug the Power Cord with wet hands to avoid electric shock. 4. Never use bent, asymmetrical or damaged burs. Always use standard burs.

5. Do not operate exceeding the maximum rotation speed specified by the manufacturer or distributor for the bur being used

6. Set the rotation speed of bur after refer to the allowable ration speed chart in the User’s Manual. 7. Always thoroughly clean the Collet Chuck and a bur before reassembled.

8. Make sure to insert the bur shank all the way, until it touches the back of the Collet Chuck. Then tighten the Collet Chuck. If the bur is used while not inserted completely, it is very dangerous because it may come out by the vibration of itself.

9. After replace a bur, it is necessary to make sure that the Collet Chuck is securely held before running the Handpiece. 10. While the Handpiece is running, DO NOT try to adjust the Set Ring to prevent the Control Unit from being damaged.

11. Before operating the Forward/Reverse Selector Switch to turn a rotating direction, it is surely required to make sure that the Micromotor has been stopped. 12. Take every possible care not to drop the Handpiece. It may be damaged a Ball Bearing or weaken durability of the Handpiece.

13. When work cutting or drilling, wear always goggles and mask. 14. Always put the Handpiece of its stand while in use.

15. Only the skilled engineer is authorized to disassemble the Spindle Set and the Micromotor in order to avoid any damage to them

16. When the Handpiece is not in use, it is recommended for a test bur or a polishing point to be kept inserted into the Collet Chuck of the Handpiece.

Micromotor SDE-H20N Handpiece Electric Manicure

MICROMOTOR HANDPIECE

Read this User's Manual thoroughly for safety before preparing the Control Unit for use.

Wear the safety glasses for protecting eyes.

How to operate

1. Connect the Motor Cord and Foot Pedal Cord to the Control Unit(refer to seperated sheet of Control Units).

2. After confirm the permission power of the Control Unit, plug the Power Cord into an electric outlet

3. Set the Speed Control Knob to the slowest position

4. Turn on the power of the Control Unit

5. If operate the Speed Control Knob clockwise, the rotation speed of the Micromotor increases

6. When wish to turn a rotating direction, after halt the Micromotor, operate the Forward/Reverse Selector Swilch

7. When wish to regulate a rotating speed using the Foot Pedal, after operate the Hand/Foot Selector Switch as "FOOT", use

No posts found

Write a review

How to Calculate shipping cost

Add the product you want to calculate shipping cost to your shopping cart.
While in your cart (click on view cart button), shipping cost can be calculated by clicking on CLICK TO CALCULATE link.
To save costs of shipping, you might want to put all products to your cart before doing the calculation.

Why us?

OUR LOWEST PRICES GUARANTEED
Shop with your confidence, we guarantee our prices are the lowest, we will match price or your money back 100%.
Customer's complete satisfaction is our number one priority.
100% Genuine, every spa pedicure chair sold by SpaSalon.us is a 100% genuine chair, supplied to us from the manufacturer. We do not sell second hand or replica equipment.
100% Secure Online Ordering, your payments are transferred securely across our 256 bit SSL server. This means that they cannot be intercepted or read by anyone.
Earn Points on Every Dollars, you earn points when you shop with us. You can use your points to pay for the order.

Packaging:

Each pedicure spa is packaged in two or more boxes that are then strapped onto a wooden skid.
The entire assemblage is wrapped with plastic shrink wrap.
Packaging materials may be cut with a knife so that the boxes may be removed from the skid individually.
The heaviest box is usually about 100 pounds.

Shipping:

Orders will be processed for fulfillment within 24 hours of receipt. Once processed, your order will usually be shipped in 3 days - 3 weeks, depending on current stock status of the product. Special orders or out of stock items may take longer. Upon shipment of your order, we will email you a receipt with tracking number so you may track your shipment to your door.
We ship worldwide (customers are responsible for broker fee, customs duty fee, and all other charges)
Shipping cost depends on locations unless it is indicated FREE in the US only in product's description, for residential deliveries add $85.
Small packages will ship using UPS, USPS or Fedex. Large packages ship using LTL trucking companies. For large packages the driver is not responsible for offloading from the truck. Liftgate service is also available for $85 additional charge. When using liftgate service, the driver will bring packages through your door if they can get through.
We guarantee our customers will receive their order(s) in the 100% condition. However, unexpected things happen. When receiving your order delivery, customers should inspect all units for any damages. If boxes are damaged from outside, you should take pictures as proofs and write on the report before signing the BOL. If you believe damaged or wrong product(s) is received from what you’ve ordered, you should take pictures as proofs. In those cases you should then contact our customer service departments for replacements.

Warranty:

Most products have 01 year manufacture warranty and 03 months for parts. If the warranty issue falls within 30 days of the original purchase date our manufacture will pay for the shipping costs involved with the resolution of the warranty issue. And if 30 days had passed, customers will be responsible for the shipping costs incurred from shipping warranty items out. Depending on the issue and the item, our manufacture might require the defective item to be returned to them before a replacement item is sent out.
Manufacturers reserve the right to make specification changes without prior written notice.

Return:

We accept returns within 30 days, more about cancellation/refund policy.